NEW!!   High Output Professional Grade Repeaters Now have manual attenuator adjustments to control the uplink and the downlink separately for EXACT adjustments to the local cell tower and your building to avoid a "noise attack" on the tower, prevention of overload and failure of your repeaters amp blocks, AND to maximize your indoor cell signal coverage to the greatest area possible.  Our specialized field phone support set up is recommended when powering up this system and is included with system purchase! Contact Us                                                                             Back to Pro Grade Systems          In-Building Wireless PCS 65 dB gain High Output Repeater • 1900 MHz PCS Band • Allows multiple phones and cellular data cards to be used simultaneously. • Works on all generations of CDMA, TDMA, and GSM. • Improves data communication rates needed for 3G-4G technologies. • Automatic gain control up to a maximum powerful 65 dB gain • Multiple gain steps 45-65 dB. High dBm Output power uplink/downlink • Power control logic ensures maximum output power is within cellular standards. • Gain indicator lights. • Oscillation protection circuit adjusts amplifier gain to prevent oscillation. • Overload detection red LED warning light indicates automatic amplifier shutdown due to signal overload. • Significantly improves voice and data signal uplink/downlink strength • Requires no physical connection to cell phone. • Greatly reduces disconnects and drop outs. • Provides high signal-to-noise ratio. • Receives and transmits with high signal strength to your carrier's tower • Works great in homes, offices, buildings and warehouses. • Extends cell phone battery life-causes cell phone to turn down it's gain • Easy to install and use. • FCC and IC type accepted. Specifications: Frequency          1850-1990 MHz Gain                   65 dB Max Output Power up to +25 dBm / +25 dBm Max RF             + 25 dBm / +25 dBm Noise Figure       4 dB nominal Flatness            ± 4 dB Isolation            > 90 dB Power Requirements 120 V AC 3 A max Connectors N-Female 50 ohms Dimensions        5.6 x 3.6 x 1.7 (inches) 14.2 x 9.1 x 4.4 (cm) Weight              1.5 lbs or 0.7 kg   In-Building Wireless iDEN 65dB Amplifier • For iDEN frequencies • Automatic gain control up to 65 dB • Approximately 2 dB gain step 40-65 dB • Power control logic ensures maximum output power is within cellular network standards • Automatic shutdown on overload • Gain indicator lights • Oscillation detection and gain reduction with auto reset intervals • AC power supply included • FCC and IC type accepted Specifications: Frequency    806-821 MHz, 851-866 MHz Gain             65 dB Max Output Power up to +30 dBm / + 30 dBm Max RF        +30 dBm / + 30 dBm Noise Figure  3 dB nominal Flatness        ± 2.5 dB Isolation        > 90 dB Power Requirements 120 V AC 3 A max Connectors N-Female 50 ohms Dimensions     5.6 x 3.6 x 1.7(inches) 14.2 x 9. x 4.4 (cm) Weight           1.5 lbs or 0.7 kg   Back to Pro Grade Systems